September 20, 2026

Rado Captain Cook Over-Pole R32193018 – Specs & Setup |Productsmanuals.com

Rado-logo-Productsmanuals.com

Rado Captain Cook Over-Pole R32193018 – Specs & Setup

Rado-Captain-Cook-Over-Pole-R32193018–Specs-&-Setup-Product-img-Productsmanuals.com

Introduction

The Rado Captain Cook Over-Pole Limited Edition is a hand-wound adventure watch that pays tribute to Rado’s 1962 original. It features the Calibre R862 Worldtimer manual-winding movement with an impressive 80-hour power reserve and a slim 10.9mm case profile—a feat made possible by omitting the automatic rotor. This manual covers everything from winding the movement and setting the dual time zone to using the rotating bezel and maintaining the high-tech ceramic finish so you can get the most from this exceptional timepiece.

Product Overview

The Captain Cook Over-Pole Limited Edition revives the legendary Over-Pole model with modern materials and a top-tier movement. It features a 39mm stainless steel or gold-PVD case, a bidirectional rotatable bezel in black high-tech ceramic, and the Calibre R862 Worldtimer manual-winding movement with 80 hours of power reserve. The watch is designed for travellers and collectors who appreciate a slim, hand-wound dive watch with genuine GMT functionality. It comes on a leather strap and is available in limited quantities.

Full Specifications

Specification Detail
Model Captain Cook Over-Pole Limited Edition (R32193018, R32116158, and other refs)
Movement Rado Calibre R862 Worldtimer, manual winding
Power Reserve Approximately 80 hours
Jewels 17
Frequency 21,600 vph (3 Hz)
Case Diameter 39.0 mm (some refs 37 mm)
Case Thickness 10.9 mm
Case Material Stainless steel / gold-coloured PVD (depending on reference)
Bezel Bidirectional rotatable, black high-tech ceramic insert
Crystal Sapphire crystal
Water Resistance 10 ATM (100 metres / 330 feet)
Dial Features GMT functionality, date indication
Strap Leather (varies by reference)
In-the-Box Watch, instruction manual, warranty card, certificate, presentation box

Key Features

Rado-Captain-Cook-Over-Pole-R32193018–Specs-&-Setup-fig-1-Key-FeaturesRado-Captain-Cook-Over-Pole-R32193018–Specs-&-Setup-fig-1-Key-Features-Productsmanuals.com

  • Manual-Winding Calibre R862: A top-shelf hand-wound movement with 80 hours of power reserve. The absence of a counterweight winder allows the case to remain exceptionally slim.
  • GMT / Worldtimer Function: Track a second time zone with the GMT complication, ideal for frequent travellers.
  • Bidirectional Rotatable Bezel: The black high-tech ceramic bezel rotates in both directions for elapsed time tracking or a third time zone reference.
  • Slim Profile: At just 10.9mm thick, it wears elegantly despite being a capable adventure watch.
  • High-Tech Ceramic Bezel: Scratch-resistant and colourfast, Rado’s signature material ensures lasting brilliance.
  • Limited Edition: Produced in limited quantities, making it a collector’s piece.
  • 100m Water Resistance: Suitable for swimming, showering, and snorkelling, though not for deep diving.

How to Use

What’s in the Box

Rado-Captain-Cook-Over-Pole-R32193018–Specs-&-Setup-fig-2-unbxing-Productsmanuals.com

  • Rado Captain Cook Over-Pole Limited Edition watch
  • Instruction manual
  • International warranty card
  • Certificate of authenticity (for limited editions)
  • Presentation box and outer packaging

Winding the Manual Movement

Rado-Captain-Cook-Over-Pole-R32193018–Specs-&-Setup-fig-3-Winding-Productsmanuals.com

Because this is a hand-wound watch, it requires regular manual winding.

  1. Unscrew the crown: Turn the crown counter-clockwise to unlock it from the case.
  2. Wind the movement: Turn the crown clockwise (forwards) approximately 30–40 times until you feel resistance. Do not force it beyond that point. A fully wound Rado automatic or manual watch has a power reserve of at least 36 hours; the Over-Pole’s R862 provides up to 80 hours.
  3. Push and screw the crown back: After winding, push the crown back to position 1 and screw it down clockwise to maintain water resistance.

Setting the Time

  1. Pull the crown out to position 3 (the farthest position).
  2. Turn the crown to set the hour and minute hands to the desired time. Note: The date changes at midnight.
  3. Push the crown back to position 1 after setting.

Setting the Date

  1. Pull the crown out to position 2 (middle position).
  2. Turn the crown to set the date. Depending on the movement, turn forwards or backwards to select the correct date.
  3. Push the crown back to position 1.

Important: Do not set the date between 9:00 PM and 3:00 AM, as the date mechanism is engaged during this window and can be damaged.

Using the GMT Function

Rado-Captain-Cook-Over-Pole-R32193018–Specs-&-Setup-fig-4-Using-the-GMT-Function-Productsmanuals.com

The Over-Pole features a GMT complication for tracking a second time zone.

  1. Set the main time using the hour and minute hands (position 3).
  2. The GMT hand (typically a 24-hour hand) can be set independently to track a second time zone. Refer to your specific reference’s manual for the exact procedure, as it varies by movement.
  3. The 24-hour bezel or inner scale helps you read the second time zone against the GMT hand.

Using the Rotating Bezel

 

Rado-Captain-Cook-Over-Pole-R32193018–Specs-&-Setup-fig-4-Using-Rotating-Bezel-Productsmanuals.com

The bidirectional rotating bezel can be used for short-time measurement or as a third time zone reference.

  1. Rotate the bezel so the triangle marker aligns with the minute handto measure elapsed time.
  2. Alternatively, set the bezel to a specific hour marker to track a third time zone against the GMT hand.
  3. The high-tech ceramic insert is scratch-resistant but can crack if struck hard. Handle with care.

Quick-Release Strap System (EasyClip)

Some Over-Pole references include Rado’s EasyClip system, which allows you to change the strap or bracelet quickly and easily without tools. To swap a strap:

  1. Locate the EasyClip release on the strap’s end piece.
  2. Press the release and slide the strap out.
  3. Align the new strap and click it into place until you hear a click.
  4. Verify the strap is secure before wearing the watch.

Water Resistance and Crown Care

The watch is water-resistant to 100 metres (10 ATM). To maintain this rating:

  • Always ensure the crown is fully screwed down after setting the time, date, or winding.
  • Do not operate the crown or pushers while the watch is wet.
  • Rinse the watch with fresh water after exposure to salt water or chlorine.
  • Have the water resistance tested annually by an authorized Rado service centre.

Troubleshooting & Common Problems

Problem Likely Cause What to Try
Watch stops running Movement not wound Wind the crown clockwise 30–40 times. If it still stops, the movement may need servicing.
Power reserve shorter than expected Insufficient winding Wind the watch fully until you feel resistance. The R862 should provide about 80 hours of reserve.
Date doesn’t change at midnight Time set incorrectly (AM/PM) Advance the time by 12 hours to correct the AM/PM setting, then reset the date.
Crown won’t screw down Cross-threading or dirt on threads Unscrew the crown completely, clean the threads with a soft brush, and try again. Do not force it.
Watch runs fast or slow Magnetism or movement needs regulation Demagnetize the watch (available at most watch repair shops). If the problem persists, send for servicing.
Bezel is stiff or hard to rotate Dirt or debris under the bezel Rinse the bezel area with warm water. If stiffness persists, have the bezel cleaned by a watchmaker.
Water inside the case Crown not screwed down, or gasket failure Stop using the watch immediately. Take it to an authorized service centre for gasket replacement and pressure testing.
Leather strap showing wear Normal use Replace the strap. Use the EasyClip system (if equipped) for quick swapping.

Frequently Asked Questions

  • Is the Captain Cook Over-Pole an automatic or manual watch?
    It is a manual-winding watch. It uses the Calibre R862 Worldtimer movement, which requires manual winding via the crown. It does not have an automatic rotor.
  • What is the power reserve?
    Approximately 80 hours when fully wound.
  • How often do I need to wind it?
    You should wind it daily, preferably in the morning, to maintain consistent timekeeping. If you let it run down completely, you’ll need to reset the time and date.
  • Is it safe to swim with this watch?
    Yes, it has a water resistance of 10 ATM (100 metres), which is suitable for swimming and snorkelling. Ensure the crown is fully screwed down before entering the water.
  • What does GMT mean?
    GMT stands for Greenwich Mean Time. A GMT watch has a fourth hand that tracks a second time zone, making it ideal for travellers.
  • Can I change the strap myself?
    If your reference includes Rado’s EasyClip system, yes—you can change the strap without tools. Otherwise, a standard spring bar tool is required.
  • Where can I find the correct manual for my specific reference?
    Enter your watch’s 8-digit serial number on Rado’s official website under Customer Service > Manuals and Catalogue > User Manual. The serial number is on your warranty card or engraved on the case back.
  • What is the difference between the Over-Pole and other Captain Cook models?
    The Over-Pole is distinguished by its manual-winding movement, slim profile, GMT function, and vintage-inspired design. Other Captain Cook models typically use automatic movements.

Tips

  • Wind it at the same time daily: Establish a routine—wind your watch each morning while getting ready. This keeps it running consistently and prevents it from stopping.
  • Avoid setting the date at night: The date mechanism is engaged between 9 PM and 3 AM. Setting the date during this window can damage the gears.
  • Keep the ceramic bezel clean: Wipe it with a soft, damp cloth. The high-tech ceramic is scratch-resistant but can crack under heavy impact.
  • Store on a watch winder? No—this is a manual watch. Store it in a cool, dry place. If you won’t wear it for a while, wind it occasionally to keep the lubricants distributed.
  • Service every 4–6 years: Manual movements benefit from regular servicing. Have the watch inspected by an authorized Rado service centre every 4–6 years.
  • Use the EasyClip system: If your watch has it, take advantage of the quick-release system to swap straps for different occasions.

Safety Information

  • Crown and water resistance: Always screw the crown down fully after winding or setting. Failure to do so will compromise water resistance and may allow moisture to enter the movement.
  • Do not operate the crown underwater: This applies to all watches, even those with high water resistance ratings.
  • Avoid extreme temperatures: Do not expose the watch to temperatures above 60°C or below 0°C, as this can affect movement accuracy and gasket integrity.
  • Magnetic fields: Keep the watch away from strong magnets (speakers, MRI machines, magnetic phone cases). Magnetism can cause the watch to run fast.
  • Shock protection: While the movement is robust, avoid dropping the watch or subjecting it to severe impacts, especially on the bezel.
  • Servicing: Only use authorized Rado service centres for maintenance and repairs. Unauthorized servicing may void your warranty and compromise water resistance.
  • Leather strap care: Leather is a natural material that deteriorates with moisture and sweat. If you swim frequently, consider a rubber or ceramic bracelet.

Related Manuals

If this guide was helpful, here are a few more popular manuals from productsmanuals.com that you might find useful:

Browse all guides at productsmanuals.com .

Copyright 2026 [Your Name or Site Name]. All rights reserved. This Rado Captain Cook Over-Pole Limited Edition manual is original content and may not be copied, republished, or redistributed without written permission. Rado, Captain Cook, and the Rado logo are trademarks of Rado Watch Co. Ltd. This guide is unofficial and not affiliated with Rado.

Leave a Reply

Your email address will not be published. Required fields are marked *